關于自動切菜機來說很簡單出現兩極分化的現象，要么就是放那擱置著不必，要么就是在運用的時分沒有保護好，構成磨損嚴峻。
As for automatic vegetable cutting machine, it is very simple to polarize, either put it on the shelf or not protect it well when it is in use, which constitutes severe wear and tear.
擱置自動切菜機其實就是一種磨損，在擱置的時分會構成腐蝕磨損的狀況，腐蝕磨損是指沖突副受到腐蝕而構成的資料丟失。腐蝕磨損在沖突的條件下構成。在濕潤的環境下腐蝕磨損甚比其他磨損的磨損速度都要快。所以機器不能長期擱置，就是這個道理。
In fact, shelving automatic vegetable cutting machine is a kind of wear and tear. When shelving, it will constitute a condition of corrosion and wear. Corrosion and wear refers to the loss of information caused by the corrosion of conflict pairs. Corrosion wear is formed under conflicting conditions. Corrosion wear in wet environment is faster than other wear. That's why machines can't be shelved for a long time.
那么關于常常運用的自動切菜機防止防止物理磨損也是比較重要的一件事。雖然現在的自動切菜機規劃進步現已盡力削減這種磨損，但是由于壽數的限制，磨損許多時分卻是無法防止的。前面介紹的腐蝕磨損屬于化學磨損，下面咱們來知道一些物理磨損的現象和防止磨損的辦法。
So it is also important to prevent physical wear and tear of the automatic vegetable cutting machine which is often used. Although the progresses of automatic vegetable cutting machine planning have tried to reduce this kind of wear, due to the limitation of life, wear can not be prevented for many times. The corrosion and wear mentioned above belong to chemical wear. Now let's know some phenomena of physical wear and ways to prevent it.
、自動切菜機軋輥和齒輥之間簡單構成部分資料從一個外表轉移到另一個外表，發作咬死，構成部件損壞。這是由于在物理學上同類資料比異類資料易黏著；齒輥中間常常發作的是同種資料之間的作業，軋輥之間更多的是面團和機器之間黏著磨損。咱們應該在運用的時分防止軋輥和齒輥咬死的狀況。
The simple component data between the roll and the tooth roll of the automatic vegetable cutting machine are transferred from one appearance to another, and the components are damaged due to seizures. This is due to the fact that the same kind of data is more easily adhered to in physics than the different kinds of data; the operation between the same kind of data often occurs in the middle of the tooth rolls, and the sticking wear between the dough and the machine is more common among the rolls. We should prevent the biting of rollers and gear rollers during operation.
2、自動切菜機的軋輥副間夾有大從硬質顆粒時，會在零件外表劃出許多溝紋，所以在出產面條的時分面粉要確保潔凈，面團和的要均勻。只要出產自動切菜機設備的資料硬度較高，自動切菜機設備軋輥肺粒不偏大，就會在一定程度上削減磨損。
2. When there are large hard particles in the roll pairs of the automatic vegetable cutting machine, many grooves will be drawn on the surface of the parts. Therefore, when producing noodles, the flour should be clean and the dough should be even. As long as the data hardness of the automatic cutting machine equipment is high and the pulmonary grain of the roll of the automatic cutting machine equipment is not too large, the wear and tear will be reduced to a certain extent.
3、咱們知道每一種鋼鐵設備都有疲憊值，當自動切菜機零件外表重復接受揉捏等高強度載荷作用時，會構成零件表而的資料逐步成塊落下，致使零件外表呈麻點狀凹坑，構成磨損。

3. We know that every kind of steel equipment has fatigue value. When the exterior of auto-cutting machine parts is repeatedly subjected to kneading and other high-strength loads, the information that constitutes the part sheet will gradually fall into blocks, resulting in a pit-like pit on the part exterior, which constitutes wear and tear.
自動切菜機廠家采用更好的資料來確保自動切菜機抗疲憊值增高，一起主張用戶加潤滑油也能極大地進步零件的抗疲憊磨損能力，主張常常對設備做潤滑。
Automatic vegetable cutting machine manufacturers use the better information to ensure that the maximum anti-fatigue value of the automatic vegetable cutting machine, together advocate that users can also greatly improve the anti-fatigue wear ability of parts, advocate that equipment is often lubricated.
、用含有硬質顆粒的流休沖擊固體外表時，就會對該外表發作沖蝕磨損，如河流對河槽的沖蝕，有時也能夠利用沖蝕磨損，如整理鑄件上附著的鉆沙，可用含有硬質沙粒的高速氣流對鑄件進行噴沖，可有效地鏟除鑄件外表的鉆沙和凸起，使鑄件表而愈加清潔、潤滑。
When a solid surface is impacted by a flow break containing hard particles, erosion wear will occur on the surface, such as the erosion of rivers to rivers, and sometimes erosion wear can be used, such as cleaning up drilling sand attached to castings, and spraying the castings with high-speed airflow containing hard sand particles, which can effectively eradicate drilling holes on the surface of castings. Sand and bulge make the casting table cleaner and more lubricated.
以上信息是由我們切丁切塊機整理發布的，如果你還想了解更多的相關信息請持續關注我們的網站：http://delatique.com謝謝你的支持！
The above information is organized and released by our Ding Cutter. If you want to know more about it, please continue to pay attention to our website: http://delatique.com. Thank you for your support!