切丁機指適用于脫水蔬菜、速凍蔬菜加工廠、果凍仙草蜜等軟質食材及食物醬菜職業加工各種根、莖類蔬菜成正方體及長方體形狀的機器總稱。
Dicing machine refers to the machine that is suitable for processing soft food materials such as dehydrated vegetable, quick-frozen vegetable processing plant, jelly, fairy grass honey and food pickles, and for processing various root and stem vegetables into cuboids and cuboids.
切丁部件由一把切片刀，一組圓刀軸以及一組橫切刀軸組成。 替換圓刀軸、橫切刀軸以及調整切片厚度能夠完結切開不同 尺度丁的轉化。
The cutting part is made up of a slicing knife, a set of round cutter axes and a set of crosscutting cutter shafts. Replacement of circular cutter shaft, crosscutting cutter shaft and adjusting slice thickness can finish the transformation of different scales.
切丁機怎么保證運用？
How to ensure safe operation of the chop machine?
盡管切丁機是一款常見的食物加工設備，且有著相應的高質量?jī)?yōu)勢，但在運用該機器設備的時分，若不留意操作方法，或者是電源方面有所反常，那么，毛病和風險也就會隨時發作。對此來說，咱們要怎么保證該機器設備的運用呢？
Although the dicing machine is a common food processing equipment, and has the corresponding high quality advantages, but when using the machine and equipment, if you do not pay attention to the operation method, or the power supply is abnormal, then the problems and risks will occur at any time. In this regard, how can we ensure the safe operation of the machine?
其實，要保證該機器設備的運用，咱們能夠從兩方面來留意。榜首方面就是相應的外部條件，比方電源，機器整體體系的狀況等等，這些狀況的完好無缺，則有利于切丁作業。而第二方面，就是作業人員的操作狀況了，的操作，無任何不利行為的呈現，就是保證該機器設備正常，運用的好方法。
In fact, to ensure the safe use of the machinery and equipment, we can pay attention from two aspects. Top of the list is the corresponding external conditions, such as power supply, the overall system of the machine and so on. If these conditions are intact, it will be conducive to the dicing operation. The second aspect is the operation status of operators, professional operation, no adverse behavior, is to ensure the normal and safe use of the machine and equipment.
因此來說，在運用這一切丁機的時分，保證，就是以上所說到的外部條件的留意以及作業人員自操作技能的保證。當然，物料方面的狀況也不得忽視。
Therefore, in the use of all the time, to ensure safety, that is, the above mentioned external conditions of attention and the operator's self-professional operation skills to ensure. Of course, the status of materials can not be ignored.
仔細查看切丁機是否存在缺、損、松問題，保證機器處于完好狀況。
Check carefully whether there is any shortage, loss and loosening problem of the chop machine to ensure that the machine is in good condition.
查看殼體內是否有異物存在，將殼體內異物去，不然簡單引起刀片的損壞。
Check whether there is any foreign body in the shell, and remove the foreign body in the shell, otherwise it will simply cause the damage of the blade.

整理操作場所，查看電源電壓是否與本機運用電壓相符，接志處是否牢靠銜接地線。
Clean up the operation site, check whether the power supply voltage is consistent with the local operating voltage, and whether the grounding mark is firmly connected to the grounding wire.
合上開關，按下“開”按鈕，查看轉向是否正確（面對推料撥盤，推料撥盤逆時針?lè)较蛐D(zhuǎn)為正確），不然，堵截電源調整接線。
Close the switch and press the "on" button to check whether the steering is correct (in the face of the push dial, the push dial rotates counterclockwise to the correct direction), otherwise, block the power supply adjustment wiring.
接通水源，以備運用。
Connect the water source for use.
切丁機的操作運用
Operation and application of dicing machine
首要，應將被切物料洗凈去雜，假如被切物料混有沙石與泥塊，刀刃口與刀板簡單損壞和磨鈍。物料更大切開直徑應不超越100mm，假如大于此直徑須分塊。
Above all, the cut material should be washed and removed. If the cut material is mixed with sand, stone and mud, the blade and blade are simply damaged and blunt. The maximum cutting diameter of material should not exceed 100mm. If it is larger than this diameter, it must be partitioned.
按下發動按鈕電機作業。（如上蓋未壓合在機架上，不能壓合開關XK，線路不通，電機不能作業）
Press the start button to operate the motor. (if the upper cover is not pressed on the frame, it can not press the switch XK, the line is blocked, and the motor can not operate).
將被切物料從料斗均勻接連投入進料斗中，在推料撥盤的效果下，被切片刀切開成所要求的厚度，接著被圓盤切絲刀切成條狀，更終被橫堵截刀切成方塊。
The cut material is evenly connected from the hopper into the hopper. Under the effect of the pushing dial, it is cut into the required thickness by the slicer, then cut into strips by the disc cutter, and finally cut into squares by the transverse blocking cutter.
切丁機標準的調整：是通過調整切片厚度，替換圓盤切絲刀和橫堵截刀來改動的。機器作業時，切勿將手及其他異物放入殼體中，以免發作風險。
Standard adjustment of dicing machine: It is changed by adjusting the thickness of slice, replacing disc cutter and transverse blocking cutter. Do not put your hands and other foreign objects in the shell when the machine is working, so as to avoid any risk.
以上新聞是由濟南宏泰食品機械有限公司整理發布的想要了解更多切絲切片機的信息，請點擊我們的網站：http://www.sdjnzlp.com。
The above news is organized and published by Jinan Hongtai Food Machinery Co., Ltd. For more information about the slicer, please click on our website: http://www.sdjnzlp.com.