介紹一下怎樣增加切菜機使用壽命。
Introduce how to increase the service life of the vegetable chopper.
1、操作前將切菜機放置在水平地面,確保切菜機放置平穩可靠;確定切菜機插頭接觸良好,無松動,無水跡;
1. Place the vegetable chopper on the horizontal ground before operation to ensure that the vegetable chopper is placed stably and reliably; Make sure that the plug of the vegetable chopper is in good contact without looseness or water trace;
2、檢查旋轉料筒內或輸送帶上是否有異物,如有異物一定要清理干凈,以免引起刀具損壞;
2. Check whether there is any foreign matter in the rotating barrel or on the conveyor belt. If there is any foreign matter, it must be cleaned up to avoid tool damage;
3、操作、調整根據所需加工的菜類選擇切割模式,離心切片機用于瓜薯類硬菜的切片,豎刀部分可將葉類軟菜或切好的片加工成不同規格的塊、丁、菱形等各種形狀;
3. Operation and adjustment: select the cutting mode according to the dishes to be processed. The centrifugal slicer is used for slicing melon and potato hard dishes. The vertical knife part can process leaf soft dishes or cut slices into various shapes such as blocks, dices and diamonds of different specifications;
4、安裝豎刀,先轉動可調偏心輪,使刀架行下死點后,再使刀架向上抬起1-2毫米,使豎刀與輸送帶接觸后,緊固螺母把豎刀緊固在刀架上。如果刀架抬起高度小,蔬菜有可能連刀,如果刀架抬起高度過大,有可能切壞輸送帶;
4. When installing the vertical knife, first turn the adjustable eccentric to make the knife rest travel to the bottom dead center, and then lift the knife rest upward by 1-2 mm. After making the vertical knife contact with the conveyor belt, tighten the nut to fasten the vertical knife on the knife rest. If the lifting height of the knife rest is small, the vegetables may be connected with the knife. If the lifting height of the knife rest is too high, the conveyor belt may be damaged;
以上就是為大家介紹的有關切絲切片機的詳細的介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以的態度,為您提供服務http://delatique.com/
The above is a detailed introduction to the slicer. I hope it will help you If you have any questions, please contact us We will provide you with professional service http://delatique.com/